Saturday, 24 March 2012

Remember Those Angry Birds?



            Motion is defined as the change in position of an object or body. The simplest case of motion is one-dimensional motion in which an object moves along a straight line (e.g. accelerating car, jogging man, falling apple). Studying the motion by a thrown object or projectile, you would notice that it follows a parabolic path known as trajectory. This is because a projectile is not only influenced by one motion, but by two. The motion that acts vertically is the force of gravity, and this pulls an object towards the earth at 9.8 meters per second. But while gravity is pulling the object down, the projectile is also moving forward, horizontally at the same time. And this horizontal motion is uniform and constant according to Galileo's principle of inertia (library.thinkquest.org).


This is how we do it!

            In this experiment, we had a projectile gun which was very fun to play with! Knowing the principles and theories of prjectile motion, we looked for the range and maximum height taken by the bullet. We compared and contrasted the theory from our observations. Also we looked for the independence of  the x and y components.

            Our observations supported or matched the theories of projectile motion. These are:

1.    The range travelled by a projectile released at a certain angle would be equal to the range travelled by a projectile released at its complement angle.

2.      The range of projectiles released at 45o would have the largest value.

3.      The x-component is independent with the y-component in a projectile motion.

4.      The higher the angle the higher the maximum height that the projectile would reach (up to 90o).

Honestly, this is the most interesting and exciting session of Physics 101.1. I really enjoyed tinkering with the projectile gun! Ha-ha-ha!



If you want to know more about projectile motion, go to this website:



If you want to have fun with an interactive software involving projectile motion, go to these website and download the software:



Now tell me, do you want to play?


Don't Move!

                Every object of any size and shape has a center of mass. The center of mass is a point at which the mass and the pull of gravity is concentrated. In solving physics problems concerning mechanics, any body is considered as a particle or a point in space. This point used is usually represented by the center of mass of an object.

                In this physics lab session, we discussed about Static Equilibrium, its concepts, principles and applications. This concerned the center of mass.

                What we actually did is to perform three experiments:


Getting the mass of the hangers and weights

                First, we looked for the center of mass of a plastic beam. Knowing that the center of mass of a geometric object is its geometric center, we easily located its center of mass.


Hangers and weights

                Second, we looked for the mass of  plastic beam by hanging the beam in a stand and then using hangers with different masses and hanging them in significant distances from where the beam is suspended.

Getting the CM of a modified beam

                Third, we attached a mass at the end of the ruler making it seem as only one object. After that, we tried to look for its center of mass by using hangers as well.

                We used the formula:

                                                        CM = ∑Mx/∑M

                                Where,
                                                M = mass
                                                X = distance from a fixed point

                Well, I understood the experiment and the process in getting what is needed, however I did not enjoy this session that much. Maybe it’s because that we’re dealing with STATIC EQUILIBRIUM, meaning no movement. Spell boring.

                .

                .

                .

                .

    Hmmm... Let me take back what I said. In a way there is something interesting about static equilibrium. There are some cool stuffs regarding it. Let me explain visually...












    Cool Right? That’s static equilibrium J

 If you really want to learn about Static Equilibrium , go to these websites:

Sunday, 29 January 2012

Techno Graph

     During our last meeting in the lab, all we did is to analyze graphs using LabQuest. LabQuest is a gadget/software that immediately produces graphs by plotting data taken by a motion sensor.

        Our first experiment consists of a ball and a motion sensor that emits sound to be able to measure the distance of an object. What we did is to lay the sensor on the table, and to throw the ball on top of it. LabQuest was able to graph the difference in distance taken by the ball over time. With this graph, we are able to know the acceleration experienced by the ball. Apparently, we have to do the experiment a lot of times to get accurate results

        The second experiment uses a laser sensor and a picket fence (if I remember it correctly).  A picket fence looks like a rectangular piece of plastic/glass striped with black and white horizontal lines. The laser sensor, on the other hand, detects if there is something blocking the emitted light. What we did in this experiment is to drop the ticket gate in front of the laser. The ticket having black and white stripes blocks and unblocks the light emitted by the sensor. LabQuest records and makes a graph of the acceleration of which the sensor detected the disruption.

        I actually had more fun doing the second experiment because it is much easier and way cooler than the first. Maybe it’s because of the laser.

        Anyway, LabQuest was really helpful and convenient because it does all the hard work. I don’t think I would be able to plot the same data manually. Thank God for technology! Banzai!

Tuesday, 17 January 2012

Why is Equal to Emex Plus Bee

          As I have said in the last post, we have counted and measured rice grains using calipers. Of course we have to record our data and to PRESENT it as well. The question is how? Can you imagine a sheet of paper showing the data of 400 rice grains about their measurements in tabular form? If you can, it’s not pretty, right? Using a table of values for showcasing a large amount of data is impractical. Firstly, because you would not be able to see the relationship between experimental values, and secondly, because it would take time to read each one when being brief is one of the most important things you have to consider in presenting your data. Also in physics, we are interested in relationships between two or more measurable quantities: how one quantity is affected as another is changed. These are why graphs are made: brevity and convenience.
          Graphs are convenient visual tools used to present large amounts of data which is capable of incorporating error values. Different types of graphs present and emphasize different relationships between two or more measurable quantities. For example, a bar graph is used to show the distribution of your values wherein one axis corresponds to categories and the other corresponds to frequency.
          A pie chart on the other hand shows breakdowns or distributions that have a conserved quantity. Parts of the whole are represented by slices of the “pie”. A best example of data using pie charts is the budgeting of the monthly income of an average family.
          Now, let’s talk about trends. Relationship between quantities is in the form of trends. One quantity increases/decreases due to a corresponding change in another. For these types of relationships, we use scatter plots, wherein measured values as an ordered pair in a two-dimensional plot.
          I am sure you know how to plot values using graphs so I would not discuss it anymore. Hence, I will discuss something not common in a graph. These are what you call error bars. Error bars represents absolute uncertainties in the data points. Its length is the value of the uncertainty.
          Trendlines, therefore, are best fit curves for the assumed dependence between variables in the study. They are based on theoretical prediction for the system being observed. We are able to find trendlines in our data of rice grain measurements using spreadsheet software.
          In doing so, we are convinced that it is easier to handle linear trendlines with equations in the form of y=mx+b because it has the least number of constants of all polynomial functions. With this, there is what we call linearization. It is the procedure of “forcing” common functions to be linear by simply manipulating some of the values to be plotted along the horizontal and vertical axes.
          Generally, we’ve had a hard time linearizing(if such a word exists xD) the function of our rice grain measurements. Maybe because it’s our first time doing so. Anyway, it’s stressful but it’s also great when you are able to do it correctly.
          Why is equal to emex plus bee.
           Fin.